| 气液增压机和伺服压接机在动作元件上的区别 |
| 添加时间：2019/12/2 14:22:31 浏览次数： |
| 气液增压机和伺服压接机在动作元件上的区别： Difference between pneumatic hydraulic booster and servo crimper in action elements: 其中，气液增压机的动作元件为气液增压缸（气液结合），不可以像伺服那样任意位置停止的（可限位），而伺服压接机的动作元件为电缸和伺服电机，可任意位置停止。 Among them, the action element of the gas-liquid booster is the gas-liquid booster cylinder (gas-liquid combination), which can not be stopped at any position like the servo (limited position), while the action element of the servo adapter is the electric cylinder and the servo motor, which can be stopped at any position. 气液增压机和伺服压接机在精度上的区别： Difference in accuracy between gas-liquid booster and servo crimper: 其中，气液增压机的精度较伺服压接机的低，在0.2mm左右，而伺服压接机在0.01mm左右，精度相对更高。 Among them, the accuracy of the gas-liquid booster is lower than that of the servo crimper, which is about 0.2mm, while the accuracy of the servo crimper is about 0.01mm, which is relatively higher. 气液增压机和伺服压接机在价格上的区别： Price difference between gas-liquid booster and servo crimper: 气液增压机相对于伺服压接机要便宜很多，反正就是一分钱一分货啦，如果精度要求不是很高的可以采用气液增压机产品，更具性价比。 Compared with the servo compressor, the gas-liquid booster is much cheaper. Anyway, it's a penny a share. If the accuracy requirement is not very high, the gas-liquid booster can be used, which is more cost-effective. |
| 上一页 水晶头压接机使用效果是非常不错的 |
| 下一页 气液增压机和伺服压接机的区别 |
Copyright © 技术支持：遨游网络