| 全自动端子机在运行中噪音很大的原因？ |
| 添加时间：2019/2/23 14:40:29 浏览次数： |
| 一般有细微的噪音是很正常的，如果是很大的那种那么有这两种问题，a．端子机某个零件、部件之间呈现磨损，导致冲突增大；b．端子机在工作中螺丝松动，导致零件颤动起伏变大。 It is normal to have slight noise in general. If it is very big, then there are two problems. A. wear and tear occurs between parts and components of terminal machine, resulting in increased conflict; B. loosening of screw in the work of terminal machine, resulting in greater parts flutter and fluctuation. 对于出现这样的问题我们要做的是找到解决的方法，要想避免端子机因噪音产生干扰，首先要选用合理的刀具，并且提高其装配精度；同时还要完善端子机的切削工艺，如果是细长工件的话尽量采用九十度来进行切削。这样一来，端子机的噪音问题应该会有所缓解。 For such problems, we need to find solutions. In order to avoid the interference caused by noise, we firstgangguanl.37ix.com.cnzhimaig.37ix.com.cnsujiao.07858.netwulumuqi.89ix.comlanzhou.89ix.com xian.89ix.comneed to choose reasonable tools and improve the assembly accuracy. At the same time, we need to improve the cutting technology of the terminal machine. If it is a slender workpiece, we should try to use 90 degrees to cut. In this way, the noise problem of the terminal machine should be alleviated. |
| 上一页 全自动端子机和半自动端子机的区别 |
| 下一页 自动端子机与端子机的的区别 |
Copyright © 技术支持：遨游网络