◎ 特别选择高碳钢材质一体原材料CNC电脑加工, 品质优良,抗张性强。
Special selection of high carbon steel integrated raw materials CNC computer processing, good quality, tensile strength.
◎ 模具可以依被压着物来计算压缩比。
The compression ratio of the die can be calculated according to the pressed material.
◎ 单回路可以配单回路泵浦，双回路100TOM搭配泵浦CTE-25AD或日本双回路控制泵浦UP-45SVTG-5。
Single-loop pump can be equipped with single-loop pump, double-loop 100TOM pump CTE-25AD or dibanhw.37ix.com.cnbianyaqisx.37ix.com.cnmojuhp.37ix.com.cn mojujcj.37ix.com.cn mojugsn.37ix.com.cnmojuly.37ix.com.cnJapanese double-loop control pump UP-45SVTG-5.
◎ 户外施工时，可以配套引擎发电机或引擎泵浦，每次作业仅8-12秒，施工最讯速、安全。
Outdoor construction, can be matched with engine generator or engine pump, each operation only 8-12 seconds, the construction of the fastest speed, safety.
◎ 工具依国家标准制造，以CNC线切割尺寸标准，准确度精准。
Tools are manufactured in accordance with national standards and CNC wire cutting dimension standards with accurate accuracy.
型 号/适用最大外径(mm) /出 力(kw) /重 量(kg) /活塞行程(mm)/尺 寸（mm） /备 注
Model/Applicable Maximum Outer Diameter(mm)/Output(kw)/Weight(kg)/Piston Travel(mm)/Dimension(mm)/Remarks
CO-100S/钢铝端子套管￠76钢套管￠36/100/33/24/374×180/电动泵CTE-25AD
CO-100S/steel-aluminium terminal sleeve 76 steel sleeve 36/100/33/24/374*180/electric pump CTE-25AD
出力：5.5
Output: 5.5
尺寸：315×80×235MM
Size: 315 x 80 x 235MM
外包尺寸：395×385×135
Outsourcing Size: 395 x 385 x 135
重量：3.2KG
Weight: 3.2KG
标准配件：10_185mm2模具个一组
Standard accessories: 10_185mm2 dies in a group
充电器，电池，工具箱各一。
Charger, battery, toolbox.